Profile Racing Hub Cassette Driver Bearing

Description

HUB CASSETTE DRIVER BEARING

These are replacement bearings for all Profile Racing and Madera hub cassette drivers. They are sealed and self-lubricating.

There are two different bearings used in the cassette hub drivers:

A. 6802 (15MM ID x 24MM OD x 5MM W)

B. 6902 (15MM ID x 28MM OD x 7MM W)

–  63802 (15MM ID x 24MM OD x 7MM W)

–  MR17287 (17MM ID x 28MM OD x 7MM W)

Some drivers use all the same type of bearings and others use a combination. Following is a guide of what bearings are in different cassette drivers.

-Profile Racing Mini, Totem or Madera cassette hub drivers-Use four 6802 bearings.

-All Profile Racing Elite Single Speed(splined, 9t, 10t) cassette hub drivers-Use two 6802 bearings & one 6902 bearing.

-Profile Racing Elite Splined MTB/Road/CX  11-12 SPD cassette hub drivers-Use two 6902 bearings for 15mm straight axle OR one 6902 bearing & one MR17287 bearing for stepped 15mm/17mm axle.

-Profile Racing Elite XX1 MTB/Road/CX  11-12 SPD  and Classic Splined MTB 11-12 SPD cassette hub drivers-Use two 6802 bearings & one 6902 bearing for 15mm straight axle OR two 6802 bearings& one MR17287 bearing for stepped 15mm/17mm axle.

-Profile Racing Elite Shimano Micro Spline  11-12 SPD cassette hub drivers-use one 63802 bearing & one 6902 bearing for 15mm straight axle OR one 63802 bearing & one MR17287 bearing for stepped 15mm/17mm axle.

-Bearing seal color subject to change without notice.

-Bearings sold individually.

Available to order: this item is ordered in for you from the brand or distributor. Contact us for current lead time.